CBD Oil Thc Limit


Buy CBD Oil Online

Why is 0.3% the legal limit for the amount of THC present in CBD and hemp? Turns out, it’s somewhat arbitrary. Join Bluebird and learn more. CBD industry experts have put together a detailed safety review of THC recommending clear policy recommendations to cut market confusion.

Why is 0.3% the Legal Limit for THC in Hemp and CBD?

What’s the difference between hemp and marijuana? By legal definition in the U.S., it really boils down to THC content, with the distinction being whether the cannabis crop has more or less than 0.3% THC by dry weight. In most of Europe, the limit is even lower at 0.2%. But where did these legal limits even come from?

For the answer to this question we can look to Canadian Scientist Dr. Ernest Small, who is credited with being the originator of the 0.3% figure.

Let’s Talk Total THC

We’ve heard the allowable 0.3% THC figure, but what exactly does this mean?

“Total THC” in the cannabis plant refers to the amount of both THCA (raw THC, which converts into THC when heated) and THC present. So when we’re talking about total THC content, we’re including both THCA and THC when calculating the percentage in the crop.

To further clarify the definition, “by dry weight,” simply means that the percentage of THC present is calculated in relation to the total plant weight when harvested and dried.

So, now that we’re savvy about the THC, let’s talk about that 0.3%.

The Magic Number

It is widely recognized that this 0.3% THC cutoff for hemp is fairly arbitrary. Like Cinderella’s carriage turning back into a pumpkin at the stroke of midnight, hemp magically turns into “marijuana” by classification once it exceeds this limit.

The 0.3% dry weight figure originated from a scientific research paper entitled Small, E., and Cronquist, A. 1976. A practical and natural taxonomy for Cannabis. Taxon 25: 405-435.

In that paper, Cannabis sativa was defined with “Δ9-THC comprising less than 0.3% (dry weight) of upper, younger leaves, and usually less than half of cannabinoids of resin,” and Cannabis indica as “with Δ9-THC comprising more than 0.3% (dry weight) of upper, younger leaves, and frequently more than half of cannabinoids of resin.”

See also  CBD Oil Fort Collins

While the definition found in this paper did also make mention of Cannabis sativa having limited intoxicant ability with Cannabis indica having a higher propensity to produce intoxicating effects, this division between sativa and indica cannabis varieties was not intended to be a prescriptive measure of the plant’s capacity to get users high.

Read: this distinction between hemp and marijuana based on THC limit is not necessarily a factor that can indicate whether a strain will or will not get users high.

Dr. Small explains further on the Cornell University FAQ page. Straight from the horse’s mouth:

“Over the years, I have had many inquiries regarding whether the 0.3% criterion was based on potential for abuse – i.e. the possibility of using hemp to get high.

“No, it was not – the criterion was based on the pattern of variation in the real world: it happens that for thousands of years people have selected plants for fiber (subsp. sativa; low-intoxicant plants) and for marijuana (subsp. indica; high-intoxicant plants), and my studies simply revealed this pattern.”

Despite this, as well as the fact that most cannabis material must contain at least 1% THC to even approach producing psychoactive effects, the Canadian government moved forward using Small’s distinction as the basis for legislation. And, following Canada’s lead, the U.S. moved forward following this same guideline when it started changing regulations around cannabis.

Hemp Going Forward

Dr. Small did also note the challenges the current legal landscape provides for the CBD industry, particularly as hemp with up to 1% THC still offers a world of possible benefits if it is permitted to be produced. Specifically, with regards to CBD production, this 0.3% THC cut-off is particularly limiting as there are few strains that produce high levels of CBD without also producing an amount of THC that exceeds the legal limit.

See also  Lazarus CBD Oil

Because of this, many hemp and CBD companies are hoping to push for an alteration to this limit going forward. In fact, Senator Rand Paul (R-Ky.) introduced a bill to Congress in early 2021 that would change the legal definition of hemp and raise the THC limit to 1%.

His bill, known as the Hemp Economic Mobilization Plan (HEMP) Act of 2020, would mandate testing of the final hemp-derived product rather than the hemp flower or plant itself, and also define a margin of error for testing THC levels. These new stipulations would prevent crops containing more than the 0.3% legal limit from being destroyed, as is mandated under current law.

Congress also instructed USDA that its Interim Final Rule concerning hemp production needed to be improved to protect the ability of farmers to grow hemp without the imminent threat of crop destruction, or the interference of the DEA.

Where to find CBD with less than 0.3% THC

Anything marketed as a CBD product should have less than 0.3% THC by dry weight. Unfortunately, you can’t necessarily always trust what a company says is in their products.

Your best bet for finding CBD products that contain less than 0.3% THC by dry weight is to shop with a company that provides third-party lab test results on each batch of its products. These test results will show the true amount of THC, along with other key cannabinoids, in each product. You can find Bluebird’s lab test results here.

If you need to limit your exposure to THC, you may want to try a CBD isolate or broad-spectrum product. Shop Bluebird’s THC-Free* line here.

CBD experts recommend THC limit for finished products

CBD industry experts have put together a detailed safety review of THC recommending clear policy recommendations to cut market confusion.

See also  CBD Gummies And Warfarin

The Association for the Cannabinoid Industry (ACI) and Centre for Medicinal Cannabis (CMC) created the report ‘Health Guidance Levels for THC in CBD products: Safety Assessment & Regulatory Recommendations​’ to bring clarity to the murky legislative CBD landscape.

The ACI explains that CBD, extracted from the Cannabis Sativa plant, is not itself a controlled substance but there are at least 12 potential controlled contaminants in CBD products including various THC (tetrahydrocannabinol) compounds. This causes confusion among the public and UK businesses relating to the control status of products containing hemp, CBD and other cannabinoids.

In the majority of Europe, it is legal for industry hemp products to be sold provided they contain 0.2% THC or less – a maximum threshold set out by WHO. However, as of January 2019, the European Food Safety Authority (EFSA) announced that food products containing CBD products would be classified as Novel Foods under Act (EU) 2015/2283, and would require authorisation prior to being placed on the market.

Companies are therefore required to file a novel food application and have this approved by the EFSA before legally being able to sell such products. The EFSA announcements notwithstanding, regulations surrounding THC limits, as well as CBD inclusion in other products is largely unclear with many European countries adopting their own individual regulations.

In most European countries, maximum levels have been agreed for controlled cannabinoids in products for consumer use. This ranges from 0.001 mg/kg (EU (EFSA) and Germany) to 0.007 mg/kg THC in consumer products (Switzerland and Croatia), as well as THC limits in CBD end products (ranging from 0.05% in the Netherlands to

How useful was this post?

Click on a star to rate it!

Average rating 4 / 5. Vote count: 1

No votes so far! Be the first to rate this post.